With the continuous improvement of people's living conditions, the requirements for living acoustic environment are also increasing. In the process of controlling traffic noise pollution, hollow glass windows are vigorously promoted by manufacturers. The hollow glass center is composed of two layers of single glass, with a 9mm air layer in the center. Due to the special structure of this kind of glass, most consumers will think that insulating glass is sound insulation, but it is not. This starts with the characteristics of the noise source.
At present, most of the noise sources for street residents are traffic noise. The traffic noise sources include three categories: first, the sound of car tires colliding with the ground. The sound is basically low and accompanied by oscillation. This situation is particularly severe near the concrete road than the asphalt road. Second, the sound of car engine, exhaust pipe and car transmission system. The higher the horsepower and the longer the vehicle limit, the stronger the noise in this regard. Third, the sound of vehicle oscillation caused by the collision of car horn, wind resistance, brake, deceleration belt and load. The instrument test shows that the sound pressure level of traffic noise should be above the medium and low frequency (below 200Hz), which is also the disadvantage of general insulating glass soundproof windows.
The structure of insulating glass is easy to form low-frequency resonance with traffic noise, and the amount of sound insulation in low-frequency band is not ideal. According to our test, the low-frequency sound insulation is large, only 19dB, and the overall sound insulation is less than 30dB. If the outdoor noise is more than 75db, the indoor sound environment can be imagined to be very annoying. Therefore, the sound insulation glass structure should be selected.
Article source: monolithic fireproof glass http://twqwq.cn/
05-04
What are the problems of composite fireproof glass in fire fighting
Some supervisors mistakenly think that the door made of fireproof glass is the fireproof door, the partition made of fireproof glass is the fireproof glass partition, and the window made of fireproof
04-12
Fireproof glass door: how to ensure that the fireproof door can play a role in critical times
How to ensure that the fire door can give full play to its ideal effect in critical time?1. Select appropriate typesAccording to the relevant specific introduction of fire doors, we can know that at t
02-17
Where is the fireproof glass generally installed
(1) the fireproof glass is generally installed on something. It may not be checked from time to time before installation. If the warpage, unsightness and glass hazards of the window edge and window ar
10-30
How to distinguish the quality of single fireproof glass?
1. Equipment conditions:No matter how to make a single piece of fireproof glass, it can't be done without some equipment, so if the manufacturer doesn't have the equipment, it can't mak